Article 10120

Title of the article

THE METHODS IMPROVEMENT FOR SOLVING TYPICAL DESIGN AND TECHNOLOGICAL TASKS BY USING COMPUTER MODELING 

Authors

Ivanova Tatyana Nikolaevna, Doctor of engineering sciences, professor, Institute of Mechanics, Udmurt Federal Research Center, Ural Branch of the Russian Academy of Sciences (34, Tatyany Baramzinoy street, Izhevsk, Russia); sub-department of automation, information and engineering technologies, Chaykovsky branch of Perm National Research Polytechnic University (73, Lenina street, Chaykovsky, Perm Krai, Russia), E-mail: reg078829@mail.ru
Ratnikov Ivan Andreevich, Master’s degree student, Kalashnikov Izhevsk State Technical University (7, Studencheskaya street, Izhevsk, Russia), E-mail: ratnicov97@mail.ru
Muyzemnek Aleksandr Yur'evich, Doctor of engineering sciences, professor, head of the sub-department of theoretical and applied mechanics and graphics, Penza State University (40, Krasnaya street, Penza, Russia), E-mail: muyzemnek@yandex.ru 

Index UDK

621 

DOI

10.21685/2072-3059-2020-1-10 

Abstract

Background. Typical design and technological problems that are solved when creating various engineering products are the designation of part sizes, the choice of material, the determination of a rational way to obtain the workpiece and the part itself, etc. Modern computer technologies can reduce the duration and eliminate possible errors when solving typical design and technological problems . The aim of the work was to improve the methods for solving typical design and technological problems that arose during the creation of a part typical for the automotive industry.
Materials and methods. When solving the selection problem, the following materials were considered: MST.6 State Standart 380-50, steel 45 State Standart 1050-2013, steel 60 GOST 1050-2013, cast iron SCh15 GOST 1412-85, cast iron SCH30 State Standart 1412-85, aluminum AK7 State Standart 1583-93, brass L60 State Standart 15527-2004, plastic ABS 2020-31 TU 2214-019-00203521-96. Research of modeling processes was performed using Компас-3D and SolidWorks simulation programs.
Results. On the example of solving typical design and technological problems that arose during the creation of a part typical for the automotive industry, possible improvements to methods for solving them are shown.
Conclusions. The application of advanced methods in the creation that arose during the creation of a part typical for the automotive industry made it possible to recommend using steel 45 State Standart 1050-2013, forging a blank forging by hot forging on a horizontal forging machine, and also creating design and technological documentation for manufacturing the details. 

Key words

typical design and technological tasks, computer technology, the designation of the dimensions of the part, the choice of material, the rational method of obtaining the workpiece and the part 

Download PDF
References

1. Zemlyanov G. S., Yermolayeva V. V. Molodoy uchenyy [Young scientist]. 2015, no. 11, pp. 186–189. Available at: https://moluch.ru/archive/91/ 18642/ (accessed Mar. 10, 2020). [In Russian]

 

Дата создания: 15.05.2020 09:27
Дата обновления: 15.05.2020 11:36